Assembly InstructionsImportant InformationNot intended for puppies in the chewing stage or chronic chewers.See enclosed sheet for warranty other important safety information.Be sure to remove the collars and tags from your pet before placing it in the home to prevent possible entanglement.Parts IdentificationNote: If you discover any parts are missing, immediately call the toll-free service helpline at 1-800-428-8560.Bottom Panel: The bottom panel has the widest spaces between the wires, upright bent hooks and no wicker. The front is identified by the pan stop.Top Panel: The top panel has open hooks on the length of two sides.Long Side Panel (2): Each side panel has two closely spaced wire rungs at the bottom and a window. Use these rungs to help identify the bottom.Door Panel (front): This is the shorter panel with the hinged door and the U-shaped slide bolt locks. To determine which end is up, make sure the latches are on the right side. The door opens in or out.Back Panel: Same size as door panel. It has a window, and the bottom has two wires spaced closer together.Corner Rods (4): These are straight wire rods with hooks on the end. They will be inserted downward through the corner loops to secure the top, sides, and ends of your pet home.Bottom Pan: This is a slide-in pan which can be easily removed for cleaning (see cleaning note at end of the instructions).Assembly InstructionsRemove the contents of the packing carton. Sort and identify all the pieces described in the Part Identification.Locate the Bottom Panel and place it flat on the floor with the hooks of the bottom panel extending upward.Locate the two side panels and lay them flat on the floor, one on each lengthwise side of the bottom panel. The loops on the short ends of each side panel and the exposed wires should face upward.Slightly lift and place the long edge of each side panel over the hooks on the bottom panel so that the second rung from the bottom of each side panel overlaps and rests directly over the hooks of the bottom panel.Using both hands (or with the assistance of a friend) pull the two side panels outward and upward to form a U shape. Make sure the second rung from the bottom of each side panel slides up to connect inside the upright hooks of the bottom panel.Position the top panel over the upright side panels with the hooks facing downward. Connect the hooks of the top panel to the top rungs of the two upright side panels.Position the door panel so the latches are on the right side, enabling the door to open outward from right to left. The uppermost loop on the door panel should rest on top of the uppermost loops on the side panels.Take two of the corner rods and insert them downward through the various intersecting loops of the two front corners.Position and hang the back panel against the open end of the pet home, making sure that the two wires that are closer together are on the bottom and that the loops face out toward you. The uppermost loops on the back panel should rest on top of the uppermost loops on the side panels.Take the remaining two corner rods and insert them downward through the various intersecting loops of the front corners.Secure the plastic pan inside the pet home with the pan stop attached to the front wire of the bottom panel of the home.
Midwest Bay Isle Collection Pet Home
Dimensions: 24"L X 20"W X 21"H
Style: For Dogs Up To 25 lbs.
Midwest Bay Isle Collection Pet Home
Dimensions: 30"L X 23"W X 24"H
Style: For Dogs Up To 40 lbs.
Midwest Bay Isle Collection Pet Home
Dimensions: 36"L X 23"W X 24"H
Style: For Dogs Up To 70 lbs.