Lee's Ultimate Gravel Vac Clean/Drain & Fill Kit

To Clean and Drain AquariumAttach the faucet adapter and Super Pump to water faucet located above a drain.Insert the Fish- Saver Cleaning Claw Assembly into the aquarium.Rotate and pull down the bottom of Super Pump.Open Manual Valve.Turn on water at faucet to start siphoning action.Insert the Fish-Saver Cleaning Claw into the gravel and move from side to side or front to rear in the direction of the vanes.While cleaning, adjust water flow using either the faucet or Manual Valve so that the maximum amount of dirt is removed with the minimum amount of water. Use the square corners of the Fish-Saver Cleaning Claw to reach hard-to-clean areas.To Fill AquariumPush up bottom of the Super Pump and rotate.When aquarium is full, close Manual Valve.Manual ValveManual Water Valve is used to:Reduce water evacuation while cleaning.Temporarily stop water flow into aquarium during filling.Prevent siphoning.Manual Valve is not intended to be used as a permanent shut-off valve.Caution:,/B> When refilling aquarium, be sure water temperature is the same as the water in the aquarium. Fill tank slowly so that any temperature adjustments can be made.If ammonia and/or chlorine are present in tap water, add appropriate removal agents to aquarium water before refilling, to protect fish and plant life.Made in USA.