Step 1: Place the wire cage set on a flat surface with the door facing upStep 2: Connect the front cage panel (includes doorway) to the left side panel. Attach the J shaped wire hook on the front panel to the left of the panel. This creates a weave connection. Repeat this process for the other sides until all panels of the wire cage set are connected with the J hooksStep 3: Turn the wire cage set upright and place it on top of the plastic base inside the grooves of the base. Lock the wire cage set to the plastic base by pressing down on the 2 wire latches on both sides of the plastic baseStep 4: First attach the fun tube to the shelf and then insert the shelf with the fun tube through the top doorway and attach to the 12th wire up from the bottom. Next insert the exercise wheel through the top doorway and attach between the 4th and 5th wires up from the bottomStep 5: Position the water bottle on the outside of cage and attach the bendable wire that is inside the water bottle to the 14th wireStep 6: Position the food dish in a corner away from the water bottleAssembly Complete: To ensure the safety of your pet be sure that the latch to the front door is secure by firmly pressing down
PETCO Hamster & Gerbil Starter Kit
